基于时空的弱点状运动目标检测技术

如何在复杂背景下持续有效地检测目标位置,一直是研究者们需要面对的主要挑战。本文在研究红外点状移动目标特征的基础上,根据目标无纹理,无形状的特性,提出一种改进的形态学目标增强算法,并利用目标连续时空不变性检测目标。首先,建立多尺度的图像金字塔,在每层上采用改进的形态学算法快速、粗糙定位小目标。然后进一步的根据目标在时空上的位置相关性,提出基于目标运动特征分析的精确检测方法。得到精确稳定的检测结果。最后实验结果表明与经典的形态学检测算法及其他算法相比,该技术能更有效地检测弱小目标,具有更高的鲁棒性。     

Torsional statics of two-dimensionally functionally graded microtubes

A size-dependent governing equation is derived to investigate the torsional static behaviors of two-dimensionally functionally graded microtubes based on the modified couple stress theory. The shear modulus is assumed to vary along the tube’s length direction according to an exponential distribute function, and varies along the tube’s radius direction according to a power-law function. A generalized differential quadrature method is developed to determine the rotational angle and shear stresses. Some illustrative examples are given to investigate the effects of applied torques, the length scale parameter and various material compositions on the torsional angle and shear stresses.     

Excitonic Properties of Chemically Synthesized 2D Organic–Inorganic Hybrid Perovskite Nanosheets

2D organic–inorganic hybrid perovskites (OIHPs) represent a unique class of materials with a natural quantum‐well structure and quasi‐2D electronic properties. Here, a versatile direct solution‐based synthesis of mono‐ and few‐layer OIHP nanosheets and a systematic study of their electronic structure as a function of the number of monolayers by photoluminescence and absorption spectroscopy are reported. The monolayers of various OIHPs are found to exhibit high electronic quality as evidenced by high quantum yield and negligible Stokes shift. It is shown that the ground exciton peak blueshifts by ≈40 meV when the layer thickness reduces from bulk to monolayer. It is also shown that the exciton binding energy remains effectively unchanged for (C₆H₅(CH₂)₂NH₃)₂PbI₄ with the number of layers. Similar trends are observed for (C₄H₉NH₃)₂PbI₄ in contrast to the previous report. Further, the photoluminescence lifetime is found to decrease with the number of monolayers, indicating the dominant role of surface trap states in nonradiative recombination of the electron–hole pairs.     

工程配套小型石料矿山复杂环境开采爆破技术

建设工程配套石料矿山相比传统以取得矿产品为目的的采石场具有周边环境复杂、施工强度高、全寿命周期短、工程质量要求灵活多变、爆破安全警戒工作量大等特点。以普陀区六横岛中远船务二期工程石料（宕渣）矿爆破开采工程为例，介绍了该类矿山开采爆破的设计施工技术要点及施工经验，有效解决了建设工程配套小型石料矿山复杂环境开采爆破存在的一些问题，对于类似工程实践有一定的借鉴价值。     

考虑变幂数的畸变动力学相似试验模型设计方法及试验研究

动力学相似理论广泛应用于大型结构的振动试验，其中畸变相似用于解决结构的设计参数不满足等比例缩放时的相似问题，针对畸变相似关系中幂数为定值导致预测精度低的问题，提出考虑变幂数的畸变动力学相似试验模型设计方法。首先，在敏感性分析与中心差分理论推导的幂数表达式的基础上，将中心差分的范围不断扩大得到一组随相似比变化的幂数。采用最小二乘法将这组幂数拟合为关于相似比的函数并建立相似关系。然后，在多盘转子系统的数值算例中将变幂数法与文献中的两种方法进行对比，结果表明，变幂数法的预测精度较文献中的方法有很大提高。最后，通过试验研究验证了数值算例中动力学模型及临界转速求解的正确有效性。相似关系的建立是以模型的临界转速为基础，因此也验证了数值算例中的相似预测结果。     

Investigation of the hydrogen induced cracking behaviour of API 5L X65 pipeline steel

The effect of microstructural features on the hydrogen induced cracking (HIC) susceptibility of two API 5L X65 pipeline steels were investigated by cathodic charging, hydrogen permeation and hydrogen microprint experiments. Microstructural evaluation after hydrogen charging revealed cracks at the mid-thickness (segregation zone) of both plates. However, more severe cracks were observed in the plate with higher dislocation density and residual stresses. The plate with lower plastic strain and more {111}-oriented grains had less severe cracks. Inclusions found along the crack path, comprising of Si-enriched oxides and carbides contributed to the initiation and propagation of cracks. The variation of the trapping behaviour and hydrogen diffusion through the plates were examined. The results confirmed that a higher ratio of reversible to irreversible traps contributes to increasing HIC severity in steels. Additionally, hydrogen transport through the steels was most prominent along the grain boundaries, indicating the importance of grain boundary character to HIC.     

Effects of graphite nano-flakes on thermal and microstructural properties of TiB2–SiC composites

In the last decades, the production of ultra-high temperature composites with improved thermo-mechanical properties has attracted much attention. This study focuses on the effect of graphite nano-flakes addition on the microstructure, densification, and thermal characteristics of TiB₂–25 vol% SiC composite. The samples were manufactured through spark plasma sintering process under the sintering conditions of 1800 °C/7 min/40 MPa. Scanning electron microscopy images demonstrated a homogenous dispersion of graphite flakes within the TiB₂–SiC composite causing a betterment in the densification process. The thermal diffusivity of the specimens was gained via the laser flash technique. The addition of graphite nano-flakes as a dopant in TiB₂–SiC did not change the thermal diffusivity. Consequently, the remarkable thermal conductivity of TiB₂–SiC remained intact. It seems that the finer grains and more interfaces obstruct the heat flow in TiB₂–SiC–graphite composites. Adding a small amount of graphite nano-flakes enhances the densification of the mentioned composite by preventing the grain growth.     

Multilayer assembly of ionic starches on old corrugated container recycled cellulosic fibers

In this study, old corrugated container recycled fibers were treated with polyelectrolyte multilayers consisting of biopolymer cationic starch with two degrees of substitution (DS) each in combination with one anionic starch. Pulp zeta potential, paper strength and the thin layer ellipsometry technique were applied to examine the influence of cationic starch DS on the formation of polyelectrolyte multilayers. The results indicated a significant interaction between the DS of cationic starch and the number of ionic starch layers formed. When low‐DS cationic starch was used, the pulp zeta potential and the paper strength increased significantly in assembling the first cationic layer. However, in depositing high‐DS cationic starch a greater zeta potential and a stronger influence on the paper strength were observed with a larger number of starch layers. This was confirmed by thin layer ellipsometry when a greater thickness of multilayers was achieved by employing high‐DS cationic starch to form a higher number of layers. © 2017 Society of Chemical Industry     

Output feedback tracking control for rigid body attitude via immersion and invariance angular velocity observers

A novel immersion and invariance (I&I) angular velocity observer is presented for the attitude tracking control of a rigid body with the lack of angular rate. Global exponential convergence of angular velocity estimate errors are guaranteed by an innovative filter design for the estimates' Euclidean norm. The proposed method requires fewer filter states compared with existing I&I angular velocity observer designs, which achieves a simpler closed-loop structure (dynamic reduction). The observer synthesis and convergence are independent of the control torque, which leads to much convenience in establishing “separation property” when combining a proportional-derivative attitude tracking controller driven by angular velocity estimates. A rigorous stability analysis is provided to ensure the (almost) global asymptotic convergence of the overall closed-loop tracking errors, and several numerical simulations are carried out to demonstrate the effectiveness of the combined implementation of proposed angular velocity observer and full-state feedback attitude tracking controller.     

食用百合高效生态栽培技术

文章从食用百合的经济意义入手,分析了现阶段百合生产存在的问题,总结了食用百合高效生态栽培技术,期望为食用百合的栽培提供理论基础与实践经验。